U3 Review Assignment.
Unit 3 Review Assignment “ Answers Multiple Choice 5 points each 1.Which RRAS service hides private IP address networks and provides many clients access to the Internet by using a single public IP address? a.NAC b.NAT c.DHCP Relay Agent d.NAP 2.Which of these is not a tunneling protocol that can be used for VPNs deployed with Windows Server 2008? a.SSTP b.L2TP c.IPSec Tunneling Protocol d.PPTP 3.When you are implementing 802.1x on a network, client computers are considered which of the following components of that network? a.Authenticator b.Supplicant c.Node d.Receiver 4.What is the properties tab that you use to manage NAP for VPN users connecting to a domain? a.Dial-in b.VPN c.Sessions d.Remote 5.NPS is not performed by which of these? a.NAP b.RADIUS server c.RADIUS client d.RADIUS proxy 6.In an 802.1x network, what role does an NPS, or a RADIUS server, perform? a.Authorization server b.Supplicant c.Authentication server d.Authenticator 7.What command will show the current routing table on a Windows Server 2008 computer running RRAS? a.Show route b.Netsh int ip show config c.Route -p d.Route print 8.By default, what TCP port does SSTP use? a.80 b.3389 c.443 d.21 9.Which VPN tunneling protocol is built to run over HTTPS? a.L2TP/IPSec b.PPTP c.SSTP d.PPP 10.Which component of an 802.1x network is responsible for requesting the identity of a client computer? a.Authorization server b.Authentication server c.Authenticator d.Supplicant 11.Routers that do not support which RFC cannot route DHCP broadcast messages between networks? a.RFC 1542 b.RFC 2895 c.RFC 2985 d.RFC 1524 12.You are configuring routing on your network, and you need to add a static route to your RRAS server using the 10.10.10.0 addressing scheme. You want all traffic going to the 10.10.10.0 /16 subnet to be routed to the gateway of 10.10.255.254. In addition, you want the route to be available if the RRAS server is rebooted. Which of the following commands will successfully create the route to meet your needs? a.Route -p 10.10.10.0 mask 255.255.255.0 10.10.255.254 b.Route -p 10.10.10.0 mask 255.255.0.0 10.10.255.254 c.Route 10.10.10.0 mask 255.255.0.0 10.10.255.254 d.Route -p 10.10.10.0 mask 255.255.255.255 10.10.255.254 e.Netsh rras ipv4 set router 10.10.10.0 255.255.0.0 10.10.255.254 True or False 5 points each 13.True or False: All Windows Server 2008 networks that use DHCP require a DHCP relay agent to be configured using RRAS. 14.True or False: Authentication is used to determine what level of access a user or client has to the network and/or resources. 15.True or False: VPN connections using L2TP are often combined with IPSec for a more secure VPN connection. 16.True or False: Microsoft recommends using RRAS as a production router in large, heavily trafficked network. 17.True or False: RIPv2 is the TCP/IP routing protocol supported on Windows Server 2008 running Routing and Remote Access Services that dynamically determines routes based on information from neighboring routers called RIP Neighbors. 18.True or False: RRAS provides DHCP Relay Agent functionality to allow dynamic IP addresses to be assigned to subnets that do not have a DHCP Server. 19.True or False: A third-party RADIUS server requires the NPS role service to authenticate Windows XP and Windows Server 2003 clients. 20.True or False: Authentication is used to prove that a user or client is who they claim to be